Products >> MicroSmart YAG Laser System
| Model 20 |
20 Watt Average Power |
| Model 10 |
10 Watt Average Power |
| Model 5 |
5 Watt Average Power |
Take a look at our diode pumped solid state YAG Laser Systems that require only
air-cooling. This system does not require a water chiller.
Features
- Highly efficient system requiring only air cooling. Required electrical power supply is 110 VAC, single phase or 220 VAC, single phase
- Average diode pump life of 10,000 - 15,000 working hours
- Sealed optical resonator with 1064nm wavelength lasr power as well as red pointer diode
- Electrically controller shutter
- Laser power generation unit is the size of a large PC computer that is easily manageable
- High quality galvo marking head with standard 160mm, F-theta objective with an approximate working area of 4.5" x 4.5"
- PC requirements are Windows 98 or ME operating system with a minimum processor speed of 600 MHz, 128MB RAM Memory, USB Port, at least 1 PCI Slot, CD-Rom, Hard Disk Drive, Mouse, Keyboard, and Monitor with resolution of at least 800 x 600.
- MaxMotion Marking/Engraving software with many of its classic and state-of-the-art features and functions to get the most out of the system
Technical Characteristics
| MicroSmart YAG |
1 |
2 |
3 |
| Output Wavelength |
1064 nm |
1064 nm |
1064 nm |
| Average Power |
5 Watt |
10 Watt |
20 Watt |
| Frequency |
20 KHz |
up to 200 KHz |
up to 300 KHz |
| Beam Quality |
TEMoo |
Lower Order Mode |
Lower Order Mode |
| Red Pointer Beam |
635 nm - Class 1 |
635 nm - Class 1 |
635 nm - Class 1 |
| Marking Speed |
up to 1000 mm/sec |
up to 1000 mm/sec |
up to 1000 mm/sec |
Available Options
- Enclosures
- Various focal lengths F-theta objectives
|
